Sunken pavers, shifting joints, cracked coping. We diagnose the root cause and repair your interlocking system properly, so the problem stays fixed. No matter who did the original installation.
Small issues in a paver system rarely stay small. Understanding what’s happening underneath the surface is the difference between a minor repair and a full replacement.
What starts as a slightly low paver becomes a trip hazard, a drainage problem, and eventually a structural failure. Early intervention keeps repairs small and costs manageable.
Interlocking paver systems rely on even load distribution. Once a section begins to shift, the movement spreads, affecting adjacent pavers, edging, and the base beneath.
Voids between the pool structure and deck surface allow water infiltration and ongoing movement. Left unaddressed, they accelerate deck failure and can compromise the pool shell itself.
Damaged, uneven, or stained pavers visibly affect curb appeal and resale value. A professional repair restores both the function and the appearance of your outdoor investment.
Uneven or lifted pavers around a pool are a genuine slip and fall risk, especially with wet surfaces. Repairing them quickly protects your family and reduces liability.
Repairing a paver system that was well-installed is far more cost-effective than replacing it. The right repair extends the life of the entire surface significantly.
Every repair starts with a proper diagnosis. We identify the root cause before touching a single paver, because fixing symptoms without fixing the cause means the problem comes back.
Base compaction failure, soil erosion, or inadequate original depth. We remove the affected area, re-grade and compact the base, and reinstall the pavers to the original level.
Often caused by tree root intrusion, soil washout, or edge restraint failure. We address the underlying cause, reset the affected section, and re-compact the joint sand.
Gaps between the pool shell and the deck surface allow water infiltration and ongoing movement. We inject water to remove air voids and stabilize the structure before resetting the deck.
Coping takes direct impact and exposure. We replace cracked, chipped, or poorly set coping stones with precise installation to restore both function and the finished edge of your pool.
Loss of jointing sand causes pavers to rock, shift, and allow weed growth. We clean, re-sand, and compact the entire affected area to restore stability and a clean finish.
When perimeter edging fails, the entire field begins to spread outward. We repair or replace edge restraints and reset the border area to stop the movement at its source.
Incorrect pitch or blocked drainage causes water to pool on the surface and penetrate the base. We re-grade affected sections to restore proper drainage and protect the base from future erosion.
Florida storms and aggressive root systems are leading causes of paver damage. We assess the full extent of damage, remove root intrusion, and restore the affected area to its original state.
Pool deck repairs require a different level of expertise than standard paver repairs. The deck sits directly on a pool shell that shifts, expands, and contracts with temperature, creating unique challenges that demand a specialized approach.
We evaluate the entire deck surface, identifying all sunken areas, voids, cracked coping, and drainage issues before any work begins.
We inject water around the pool perimeter to flush out and collapse air voids that exist between the pool structure and the deck surface. This critical step stabilizes the subsurface and prevents the same failure from recurring after repair.
With the base stabilized, we reset all affected pavers to the correct level, re-compact joint sand, and ensure proper drainage pitch away from the pool and structure.
Any coping repairs are addressed last. We do a final walkthrough to confirm levels, drainage, and the visual finish before handing the project back to you.
Why This Step Matters
Most contractors skip the void injection step entirely, resetting pavers over an unstable subsurface and leaving the same conditions that caused the failure in the first place. Within months, the deck begins to sink again. Our void injection process ensures the space between the pool shell and the deck is fully consolidated before any paver is reset. It’s the step that makes the repair last. We treat pool deck repairs as structural work, not just a surface fix.
We always aim to match your existing pavers as closely as possible, but there is an important reality every homeowner should understand before a repair begins. Natural stone and concrete pavers change appearance with sun exposure, weather cycles, and sealer wear. No contractor can guarantee an invisible repair using new material.
Pro Tip
When your original installation is completed, set aside 5–10% of the materials as spare pieces and store them in a dry, covered location. They will be invaluable if repairs are ever needed.
The same precision and care we bring to new installations, applied to bringing your existing surface back to its best.
We assess the full extent of the problem, not just what’s visible. Surface symptoms are evaluated against likely subsurface causes before we propose any scope of work.
You receive a clear explanation of what we found, what needs to be done, and why, no jargon, no inflated scope. We only recommend what the system actually needs.
We fix what caused the problem, not just how it looks. Base re-compaction, void injection, drainage correction, whatever the root cause requires, that’s where we start.
With the base corrected, we reinstall pavers to the original level, re-sand joints, and restore the surface to as close to its original state as the materials allow.
We walk the repair with you before we leave. Every level, every joint, every edge, reviewed together so you can see exactly what was done and feel confident in the result.
You don’t need to have been a Paving Crew customer to call us for a repair. We service interlocking paver systems installed by any contractor, and we approach every job the same way regardless of who did the original work.
Any paver system, any pattern, any age
Including void injection and coping repair
Residential outdoor living spaces
HOAs, commercial properties, and common areas
Post-hurricane and post-storm assessment and repair
Local Guide
The Paving Crew did a very nice job in repairing some damage I recently had as a result of another company installing hurricane protection. My lanai looks perfect now. The crew was efficient and I’m happy with the results. They did a great job.
Local Guide
I had a smaller job and the paving crew did a superfantastic job they were timely answered my questions and did great work. I would highly recommend them.
Local Guide
We’ve used the Paving Crew twice, initially to install a travertine patio, then to raise our driveway to prevent continued flooding during our increasingly heavy rains. All of the staff is conscientious, knowledgeable and hard working. They do great work!
Yes. We repair interlocking paver systems regardless of who installed them originally. We assess the condition of the system, identify the root cause of the problem, and restore it back to its original state. You don’t need to be a previous Paving Crew customer to call us.
We always do our best to source materials that match as closely as possible, but a perfect color match with new material cannot be guaranteed. Pavers change color over time through sun exposure, sealing, weathering, and natural aging. The best way to ensure a seamless repair is to keep leftover original pieces stored from when the project was first installed. We strongly recommend this to every customer.
When a pool deck is repaired, air voids often exist between the pool shell structure and the deck surface above it. These voids allow the deck to settle and shift after repair. We inject water around the pool perimeter to consolidate and remove these air pockets, stabilizing the subsurface before any pavers are reset. This step is what prevents the same sinking from happening again.
The most common causes are inadequate base compaction during the original installation, soil erosion from water infiltration, tree root intrusion, edge restraint failure, or loss of joint sand. In Florida, the combination of heavy rain, sandy soils, and aggressive root systems makes base integrity particularly important. We identify the specific cause before beginning any repair.
Most standard residential repairs are completed in one to two days. Larger repairs, pool deck void injection projects, or situations requiring material sourcing may take longer. We give you a clear timeline during the assessment so you know what to expect before work begins.
This depends on the extent of the damage and the condition of the base. In many cases, a targeted repair is far more cost-effective than full replacement, especially when the original installation was good quality and only a portion of the system is affected. We assess each situation honestly and recommend the approach that makes the most sense for your specific conditions and budget.
Schedule a consultation·Visit our Design Center·Call today
Or visit our 5,000 SF Design Center in Sarasota
